System Type Active 12” 2-way Bi-Amplified Frequency Response (+/-3 dB) 60 Hz – 20 KHz Frequency Range (-10 dB) 55 Hz – 20 KHz Calculated Maximum SPL @1m 130.5 dB Low Frequency Transducer – Size ( mm / inches) 332 mm / 12″ Coil Size ( mm / inches) 75 mm / 3″ Impedance 4 Ω High Frequency Transducer – Type Compression Driver Coil Size ( mm / inches) 51.2 mm / 2″ Exit Size ( mm / inches) 35.6 mm / 1.4″ Diaphragm Material Titanium Impedance 8 Ω Nominal Coverage (H x V) 90° x 45° Amplifiers Amplifier Design Class D Power Rating: 1600 W Peak (1400 W LF + 200 W HF), 800 W Continuous (700 W LF + 100 W HF) Power On Protection Power Switch On/Off Mute Thermal Protection Amplifier Shut Down. Auto Reset Low Line Voltage Shut Down 80% Nominal Line Voltage Driver Protection Independent LF and HF Limiters DC and Short Protection Yes Clip Limiter Turns on Approx 600 W Output Limiter Indicator Red LED Power Indicator Green LED Connectors Input A – type Switchable Balanced Mic or Line Level Input Input Sensitivity Mic:-40 dBu Line:0 dBu Maximum Input Level 22 dBu Input Connector XLR 1/4〞Combo jack / 2 x RCA Input Impedance Balanced:20 KΩ Unbalanced:10 KΩ Line Output Connector Switchable LOOP/MIX Balanced pin XLR Connector Impedance Balanced Balanced: 200 Ω Unbalanced:100 Ω Loop Gain Mic:69 dB, Line:29 dB AC Power details – Power Supply High Efficiency Switching Mode Power Supply AC Power Options AC100-120 V~/220-240 V~,50/60 Hz Hardware – Rigging M10 x 6 Pole Mount Dual Angle (0⁰ or 10⁰) 35 mm Pole Socket Enclosure Material and finish 15 mm Plywood Colour Options Black Paint Grille Material & Finish 1.5 Steel Unpacked dimensions – Height 640 mm / 25.2″ Width (Front) 390 mm / 15.35″ Width (Back) 241.2 mm / 9.5″ Depth 373 mm / 14.69″ Packed Dimensions – Height 745 mm / 29.3” Width (Front) 566 mm / 22.3” Width (Back) 328 mm / 12.9” Depth 464 mm / 18.3” Net Weight ( kg / lbs) 26.5 kg / 58.3 lbs Gross Weight ( kg / lbs) 30.0 kg / 66.0 lbs